Canon LV-5220 - Multimedia Projector SVGA Функциональная спецификация - Страница 18
Просмотреть онлайн или скачать pdf Функциональная спецификация для Проектор Canon LV-5220 - Multimedia Projector SVGA. Canon LV-5220 - Multimedia Projector SVGA 42 страницы. Multimedia projectors
Также для Canon LV-5220 - Multimedia Projector SVGA: Функциональная спецификация (20 страниц), Технические характеристики (6 страниц)
Печатать страницу
Expand Serial Command Functional Specification
8.5.8. CF_PCSTORE Command
Command
"CF_PCSTORE"_%1" [CR]
"MODE1" ------------ Store current PC Adjust status to Mode 1
"MODE2" ------------ Store current PC Adjust status to Mode 2
%1
"MODE3" ------------ Store current PC Adjust status to Mode 3
"MODE4" ------------ Store current PC Adjust status to Mode 4
"MODE5" ------------ Store current PC Adjust status to Mode 5
Store current PC Adjust status (each parameter status such as Total dots) to
Mode 1 – 5.
Details
This command operates the same operation as storing to Mode1 – Mode5 in PC
Adjust Menu.
(Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable
8.5.9. CF_PCMODEFREE Command
Command
"CF_PCMODEFREE_%1" [CR]
"MODE1" -------- Mode 1 to Free
"MODE2" -------- Mode 2 to Free
%1
"MODE3" -------- Mode 3 to Free
"MODE4" -------- Mode 4 to Free
"MODE5" -------- Mode 5 to Free
Reset Mode 1, 2, 3, 4, and 5 to Free.
Details
This command works as the same when resetting Modes in PC adjust menu.
(Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable
8.6. Video Control Command
8.6.1. CF_AVDDOTS Command
Command
"CF_AVDDOTS_%1" [CR]
"UP" ------------ Current setting value +1
%1
"DN" ------------ Current setting value –1
Set AV Service Mode Horizontal Resolution value.
(Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On. When there e is no signal, the Projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.2. CF_AVDLINE Command
Command
"CF_AVDLINE_%1" [CR]
"UP" ------------ Current setting value +1
%1
"DN" ------------ Current setting value –1
Set AV Service Mode Vertical Resolution value.
(Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On. When there e is no signal, the Projector returns "101" [CR].
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] ---- Input is Video
"000" [CR]
"101" [CR] ---- Input is Video
"000" [CR]
"101" [CR] ---- Input is PC
"000" [CR]
"101" [CR] ---- Input is PC
Page 17 of 41