Canon LV-7220 Функциональная спецификация - Страница 17
Просмотреть онлайн или скачать pdf Функциональная спецификация для Проектор Canon LV-7220. Canon LV-7220 42 страницы. Expand serial functional specification
Также для Canon LV-7220: Функциональная спецификация (20 страниц)
Печатать страницу
Expand Serial Command Functional Specification
8.5.5. CF_V-POS Command
Command
"CF_V-POS_%1" [CR]
"0000 – nnnn" ----------- Directly set Vertical Position setting value
%1
"UP" ---------------------- Vertical Position setting value +1
"DN" -------------------- Vertical Position setting value –1
Set Vertical Position PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.6. CF_DDOTS Command
Command
"CF_DDOTS_%1" [CR]
"0100 – nnnn" --------- Directly set Display Dots setting value
%1
"UP" ---------------------- Display Dots setting value +1
"DN" ---------------------- Display Dots setting value –1
Set Display Dots PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.7. CF_DLINE Command
Command
"CF_DLINE_%1" [CR]
"0100 – nnnn" --------- Directly set Display Line setting value
%1
"UP" ---------------------- Display Line setting value +1
"DN" ---------------------- Display Line setting value –1
Set Display Line PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
"nnnn" is maximum value. This is current Total Line
value - Display Line value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Dots value
– Horizontal Position value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Line value
– Vertical Position value.
"000" [CR]
"101" [CR] ---- Input is Video
Page 16 of 41