Canon LV-7297M Спецификации команд - Страница 6

Просмотреть онлайн или скачать pdf Спецификации команд для Проектор Canon LV-7297M. Canon LV-7297M 26 страниц. Lv series multimedia lcd projectors
Также для Canon LV-7297M: Технические характеристики (2 страниц)

Печатать страницу

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/

LV-8227M/ LV-7292S/LV-7297S/LV-7392S

Notes for Communication

. . The projector control command is defined as one command/one line that starts with "C" and ends

with carriage return (0x0D).

. . There are two types of Commands: Functional Execution Commands and Status Read

Commands.

Example of Functional Execution Command: "C05" [CR]

Example of Status Read Command: "CR0" [CR]

. . When it takes more than one second to receive one command, it does not operate.

The information of buffer is cleared when it takes more than one second to receive carriage return

(0x0D) after the projector receives the first data "C".

. . For Command pipelining, wait for the interval of 100ms after receiving a response.

PC → Projector

Projector → PC

3.4.1. When a command is issued before receiving a response, the function is not executed

properly.

3.4.2. Except for when there is no Response for more than 5 seconds.

. . It takes about 5 seconds for internal initialization after plugging in AC power. During this time, it

cannot process commands. Do not issue any command.

. . The number of characters of response to Status Read Commands depends on commands.

Please see [7. Status Read Commands].

. . Characters for commands must be Capital (A - Z).

Command

"C"

"0"

"7"

(A few ms

-3-

Basic Serial Command Specifications

More than 100ms

Next Command

ACK

Response

5s)