Canon WUX500ST Руководство - Страница 11
Просмотреть онлайн или скачать pdf Руководство для Проектор Canon WUX500ST. Canon WUX500ST 19 страниц.
Печатать страницу
●Setup and standby power
Standby power for the projector setup and network setup will change accordingly:
Interface setup
HDBaseT
ON
ON
OFF
●NMPJ1.3
Video data from the computer can be shared and distributed via network.
■ The latest functions can be enjoyed with the Auto Updating feature.
■ Use DNS to search for a projector with its host name.
■ Compatible with Windows 10
●Wireless specifications
Transmission standards
Transmission distance
Wi-Fi authentication
(*1)
WPS
Encryption
Connection mode
*1: WPS (Wi-Fi Protected Setup): This standard enables fuss-free configuration of wireless LAN connection and security setup. WPS
automatically scans for a nearby connectable device thus there is no need to obtain and enter the IP address of the connecting
device.
*2: PjAP (Projector Access Point): This is an original method to make the projector as an access point. It is similar to a conventional ad
hoc wireless system, which connects the projector and other device directly; however PjAP specifications further enable
connection of up to 5 devices simultaneously.
Connection modes and functions
Mode
Infrastructure
PjAP
*3: Dedicated application software downloadable from the WUX500ST.
*4: Power ON command cannot be performed in wireless connection.
Automatic scanning
The WUX500ST automatically scans for an access point and makes connection when
the projector is set in the following conditions:
w Wireless network setting is turned ON
w
The projector starts up with the wireless network function turned ON
Infrastructure
PjAP
*5: Scanning range and procedure details will not be mentioned in this document.
WUX500ST (11/18)
Selection of a wired
network
LAN port
HDBaseT
LAN port
w IEEE 802.11b
Approx. 25 m
Measured under a condition of no surrounding radio wave interference with
clear view to an access point.
Obtained
Supported: Push-button configuration (PBC) and PIN code method (PIN)
w Open
w WEP
w Infrastructure mode
(*2)
w PjAP
mode
Connection
WPS
Manual
NMPJ
command
(PBC, PIN)
(*3)
✓
✓
✓
×
✓
✓
Mode
The last or previous access point
The last access point
Network function(network standby setup)
On (Eco)
1.8W
1.8W
0.6W
w IEEE 802.11g
w WPA-PSK TKIP
w WPA-PSK AES
Usable (✓) and unusable (—) functions
User
Control using a
Mail
browser
(*3)
✓
✓
✓
(*4)
✓
✓
—
Access point
(*5)
Off
1.6W
1.6W
0.2W
w IEEE 801.11n
w WPA2-PSK TKIP
w WPA2-PSK AES
PJLink/AMX/
Firmware
SNMP
Crestron RoomView
update
—
—
—
—
—
—