Akyga AK-EC-07 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильные аксессуары Akyga AK-EC-07. Akyga AK-EC-07 5 страниц.
Печатать страницу
AK-EC-07 - user manual
Charging status indicator
Failure LED
---
Shine
---
Blink slowly
---
Blink fast
---
Flashes
---
---
Blink
Shine
How to use
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
3. Turn off the car motor.
4. Check that the power socket is not damaged.
5. Connect the charger to the electrical outlet (Schuko).
6. Select the appropriate charging current by pressing the button.
7. Pull the protective cap off the plug.
8. Connect the other plug to the car's charging port.
9. The charging process will start automatically. The red diode will light up.
10. When the charging process is finished, the charger will automatically turn off. The LEDs will
turn off.
11. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port by pressing the button that releases the clip and put the
protective cap on.
Cleaning the EV power adapter
Disconect the EV charger from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the charger.
ź
Do not use abrasive or chemical cleaners.
ź
State LED
Charge LED
---
---
---
Shine
---
---
Notice
Off, no connection with the car
There is a connection with the
car but it does not charge
Car communication failure
Car is charging
End of charging process
Charger failure
p. 4