Dormakaba 7400 SISJH Руководство по установке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке для Система открывания дверей Dormakaba 7400 SISJH. Dormakaba 7400 SISJH 10 страниц. Applied door closer, spring stop arm for regular
Печатать страницу
dormakaba 7400 SIS, SISJ, SISH, SISJH Installation Instructions
3.2 Securing main arm to door/frame
Fig.6
7/8"x1/2"
torx head
shoulder bolt
Adjusting
tube
Damper
Left hand door
shown
Pinion
Pinion
screw
3.3.1
Secure adjusting tube to damper.
•
Use one 7/8" x 1/2" torx head shoulder bolt provided.
3.3.2
Secure damper assembly to frame.
•
Use two 5/16" x 2" flat head screws
[#20 x 2" flat head wood screws] provided.
3.3.3
Secure main arm to operator pinion.
•
Use a torque wrench (25 ft-lbs) and provided pinion
screw [M8 x 30 socket head cap screw].
3.3 Securing main arm to closer
Fig.7
Hinge
Bar/shoe
assembly
Main arm
3.4.1
Slide end of connecting arm into end of damper
assembly.
7400 Surface Applied Closers
Non-hold open
Damper/
Damper
assembly
Adjusting
tube
Main/
connecting
arm assembly
Left hand
door shown
Connecting
arm
08279501
Right Hand (RH)
Configuration Plate
pointing to the RIGHT
Hold open
Pinion
Pinion
screw
NOTE: To disassemble hold open plate:
•
Remove both screws from bottom of plate using a 3/16"
hex key.
•
Keeping all washers in place, flip plate over to orient as
per image above.
•
Re-secure plate with both screws.
5/16-18 x 3/8"
hex bolt
3.4.2
Secure connecting arm and bar/shoe assembly.
3.4.3
Use provided fastener [5/16-18 x 3/8 hex bolt].
Top jamb mount
Left Hand (LH)
Configuration Plate
pointing to the LEFT
Bar/shoe
assembly
Main/
connecting
arm assembly
Left hand
door shown
01-2021
7