Canor 8588008161760 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Canor 8588008161760. Canor 8588008161760 7 страниц. Integrated tube amplifier
Печатать страницуMONOBLOCK mode:
As the amplifier has all its basic functions controlled electronically, we have capitalized on this advantage and
adjusted amplifier control the way to be able to use a stereo amplifier as a monoblock. We, therefore, developed a
special protocol and a C-link communication interface.
This solution benefits from a great advantage, hence the monoblocks do not need a control preamplifier and AI
1.10 can thus be used as an integrated stereo amplifier and as a monoblock. Attenuators ensure absolute channel
concurrence. How it works: Two Virtus I2 get connected by an RJ45 data cable via a C-link bus. The switch next
to the C-Link connector will determine the Master unit and Slave unit. At this moment one amplifier becomes a
MASTER and the other one a SLAVE. The MASTER amplifier then takes over the entire control of both amplifiers
synchronous-wise. SLAVE amplifier has all the control elements turned off.
Interconnecting two Virtus I2 amplifiers by a data cable must be carried out when both amplifiers are
turned off!! Caution! Make all connections only if the device is disconnected from the mains!
IMPORTANT NOTE:
In standard stereo use of Virtus I2 amplifier, the Master/Slave switch must be set to MASTER! In Slave mode, all
the control elements of the amplifier are turned off.
Specifications:
Stereo output power:
Monoblock output power:
Input sensitivity:
Frequency range:
Input impedance:
Stereo Inputs:
Monoblock Inputs:
Total Harmonic Distortion:
THD Monoblock:
Signal-to-noise ratio:
Signal-to-noise ration monoblock: >100dB
Tube Complement:
Power:
Dimensions (WxHxD):
Weight:
European Community Directives
This product is designed and manufactured to comply with existing laws of the European Community. This product
is certified by a testing laboratory and bears the CE mark.
Guarantee conditions:
Your CANOR Virtus I2 integrated tube amplifier is guaranteed against any defect in materials and workmanship
for a period of 24 months from the date of purchase except for audio vacuum tubes that are covered by warranty
for a period of three months.
The warranty only applies if an original proof of purchase and acknowledged certificate of warranty can be
furnished. The warranty covers defects in materials and labour but does not cover misuse, unauthorized
modifications, and external causes such as acts of nature.
2 x 40W /4,8 Ohm - ultra-linear
2 x 20W /4,8 Ohm - triode
1 x 80W /8 Ohm - ultra-linear
1 x 40W /8 Ohm - triode
500mV
10 - 50 000Hz -0,5dB /5W
30 kOhm
5 RCA
2 XLR
<0,05% /1kHz, 5W
<0,008% /1kHz, 5W
>95dB
1x 12AX7, 2 x 12AT7, 4 x KT88
230V / 50Hz / 375VA
435 x 170 x 485 mm
28 kg