Dormakaba KTV 4 Руководство по эксплуатации и техническому обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Система внутренней связи Dormakaba KTV 4. Dormakaba KTV 4 16 страниц. Revolving door
Печатать страницу
REVOLVING DOOR LOG BOOK
Report for initial inspection
To be completed by a qualified technician at installation
The following list of components and functions to be inspected is only a reference and shall help the inspector
during inspection. From case to case, the inspection can be more or less comprehensive. In principle, the inspector
has to perform a visual inspection and functional tests to check the system for completeness. In addition, the
system status and the efficiency of the components and the respective safety equipment require inspection.
Please consider the separate inspection instructions supplied with the individual door types.
3.1
General
•
Functionality of door system
•
Proper mounting
•
Connections/Power supply
•
Guide rails and base sections
•
Force transmission/Incremental encoder
•
Bearings
•
Glazing, Cover
•
Coating, Corrosion protection
•
All documentation complete
3.2
Check safety equipment according
to risk assessment to EN 16005
•
Finger protection (crushing, shearing
and drawing in)
•
Safety sensors/Sensor monitoring
•
Reversing/Stop equipment
•
Safety screen
•
Safety contact strips (SCS)
•
Force limitation
•
Emergency pushbuttons
•
Safety sensors
•
Fire alarm connection
•
Batteries
Date of inspection:.
Name of inspector (in block letters):
(Qualified technician)
Note: The safety compliance of an automatic door system is dependent on the appropriate choice and
combination of other safety equipment with the operator and must be assessed as the whole system.
2021-10
3.3
Control elements
•
Pushbuttons/switches
•
Contact mats
•
Radio controls/Remote controls
•
Card readers
•
Motion detectors
3.4
Function
•
Friction clutch
•
NC contact (limit switch)
•
NO contact (limit switch)
•
Locking device, Deactivation
•
Deactivation of safety equipment
•
Emergency manual operation
•
Emergency Opening/Rubber cord/
Auxiliary drive
3.5
Check door system for proper
functioning in all operation modes
•
OFF
•
AUTOMATIC
•
PERMANENT OPEN
•
PARTIAL OPEN
•
EXIT ONLY
•
AUTOMATIC 1
•
AUTOMATIC 2
•
LOCKING DEVICES
.........................................................................................................................
.........................................................................................................................
5