Asus Tinker Board Series Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Материнская плата Asus Tinker Board Series. Asus Tinker Board Series 12 страниц.
Печатать страницу
- 1. Table of Contents
- 1. 1 Basic Requirements
- 2. 2 Getting Started
- 2. Setting up Using Emmc (Tinker Board S Only)
- 2. Setting up Using a Microsd Card
- 3. 3 Writing the os Image
- 3. Using Etcher (Cross-Platform)
- 3. Using DD Command (Linux)
- 4. 4 OS Write Recovery (Tinker Board S Only)
- 4. Rewriting the os Using UMS from Emmc
- 4. Rewriting the os Using UMS from a Microsd Card
2.2
Setting up using a microSD card
You may use a mircoSD card to set up your Tinker Board OS. Please refer to the steps
below.
1.
Write the downloaded OS image to a microSD card using a third-party ISO
software, such as Etcher or Win32DiskImager. You may refer to the Writing the
OS image section of this manual for more information on writing the OS image.
•
Etcher is supported on Windows
•
Please refer to http://etcher.io/ for more information on Etcher.
•
Please refer to http://sourceforge.net for more information on Win32DiskImager.
2.
Insert the microSD card to your Tinker Board.
Please refer to your Tinker Board product manual for the location of the microSD slot.
3.
Connect your Tinker Board to a power source using the bundled adapter to boot
your Tinker Board.
6
, Mac, and Linux.
®