Asus AAEON BOXER-8251AI Руководство пользователя - Страница 21

Просмотреть онлайн или скачать pdf Руководство пользователя для Настольный компьютер Asus AAEON BOXER-8251AI. Asus AAEON BOXER-8251AI 39 страниц. Nvidia jetson xavier nx platform ubuntu 18.04
Также для Asus AAEON BOXER-8251AI: Руководство по установке и эксплуатации (6 страниц), Руководство по установке и эксплуатации (6 страниц)

2.3

List of Jumpers

The board has a number of jumpers that allow you to configure your system to suit

your application.

The table below shows the function of each of the board's jumpers

Label

CN1 (Pin 7-8)

2.3.1

You can configure your system to match the needs of your application by setting

jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins

and a small metal clip (often protected by a plastic cover) that slides over the pins to

connect them. To "close" a jumper you connect the pins with the clip.

To "open" a jumper you remove the clip. Sometimes a jumper will have three pins,

labeled 1, 2 and 3. In this case you would connect either pins 1 and 2 or 2 and 3.

A pair of needle-nose pliers may be helpful when working with jumpers.

If you have any questions about the best hardware configuration for your application,

contact your local distributor or sales representative before you make any changes.

Generally, you simply need a standard cable to make most connections.

Chapter 2 – Hardware Information

Function

AT/ATX mode select