Dot Origin VTAP100 Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Устройство для чтения карт Dot Origin VTAP100. Dot Origin VTAP100 13 страниц. Desktop usb reader
Также для Dot Origin VTAP100: Руководство по установке (16 страниц), Руководство по установке (17 страниц)

Печатать страницу
A typical RS232 cable has the following D9 connector pinout:
The VTAP100 requires a 5V power supply. This can either be provided via:
J1 (pins 1 and 3) and the serial cable/host (not all RS232 devices have 5V on pin 9), or
l
other USB connectors on the VTAP100 PCB.
l
Some serial cables have a separate DC 5.5/2.1mm barrel connector to supply power. In these
cables, typically, the centre pin is +5V and the outer barrel is GND.

3.5 Optional wallbox

The optional wallbox for a VTAP100 is 86mm x 86mm and 25.5mm deep.
You can design and affix your own branded label to the unit. The size of the label recess is 72.33 x
72.33 mm with 4mm radius rounded corners as shown below. If you need help branding units do
VTAP100-OEM V3A INSTALLATION GUIDE
Figure 3-4 Typical RS232 cable
Pin
Function
2
3
5
9
Figure 3-5 VTAP100-USB
TXD
RXD
GND
+5V supply
PAGE 6