Dot Origin VTAP100 Руководство по установке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по установке для Устройство для чтения карт Dot Origin VTAP100. Dot Origin VTAP100 17 страниц. Desktop usb reader
Также для Dot Origin VTAP100: Руководство по установке (13 страниц), Руководство по установке (16 страниц)
Печатать страницу3 Mechanical installation
The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.
WARNING: Observe all Safety instructions when installing the VTAP100 PCB.
There is more detailed information in section 3.5 about how to fit the VTAP100 unit inside
the Optional case case, if used.
3.1 Power
Connect the PCB to a PC using only a MicroUSB to USB cable.
The VTAP100 is rated at 5V DC (typ. 110mA, max 150mA) for power over USB.
3.2 Environment
The VTAP100 must be stored and operated under the following conditions:
Ambient temperature -25 to +70°C (-13 to 158°F)
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP100 OEM MODULE
INSTALLATION GUIDE
Figure 3-1 VTAP100 components - v4a Hardware
© DOT ORIGIN
VTAP MOBILE WALLET READERS
PAGE 4