Dot-Spot LED recessed spot basic midi Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Прожектор Dot-Spot LED recessed spot basic midi. Dot-Spot LED recessed spot basic midi 12 страниц.

Dot-Spot LED recessed spot basic midi Руководство по эксплуатации

Technical data

Spotlight mini/midi
Voltage
Power consumption
Luminous flux
Light colour
Beam angle
Connection cable
CRI
Protection class
Temperature range
Storage temperature
LED
Housing
Power Supply
Input
Output
Power
Protection class

Safety

Intended Use

The dot-spot recessed spots are intended for permanent installation in the floor, wall and ceiling.
They are suitable for effect lighting and path and marker light. They are designed for operation in
moderate climates and under water (diving depth 1 m). They do not meet the requirements for lights
for vehicles to drive on according to DIN EN 60598-2-13, section 13.6.2. The luminaire is designed
for operation on safety extra-low voltage certainly.
Safety instructions
The applicable safety regulations must be observed during assembly. The dot-spot re-
cessed spots are operated with a protective low voltage of 24 V DC. To avoid dangers and
defects, disconnect the power supply unit from the power supply before starting any work
on the spotlight or installation.
Do not open the housing of the lamp. Only connect the LED spotlight to power supplies whose out-
put voltage does not exceed 24 V DC. Check whether the mains voltage matches that of the power
supply unit. Incorrect voltages can destroy the LED spotlight and the power supply unit.
Follow the installation instructions for the power supply unit. Do not overload the power supply! The
total output of all loads connected to the power supply unit should be approx. 10% less than the
nominal output of the power supply unit.
24 V DC
1 W / 3 W
40 lm / 207 lm
2700 K
120° diffuse / 40°
5 m with low voltage plug
>90
IP 68
- 25 °C – +50 °C
- 40 °C – +80 °C
not interchangeable, high-power branded LED, integrated driver
V4A stainless steel; tempered glass panel, 4 mm
230 V AC, 50 Hz
24 V DC
20 W
IP 65
32 mm
2 mm
42 - 45 mm
38 mm
60 mm
18 mm
9