Dagger Torrent Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Лодка Dagger Torrent. Dagger Torrent 12 страниц.
Печатать страницуC
& M
ARE
AINTENANCE
ROTOMOLDED KAYAK CARE
Our "roto" kayaks are made of high-density linear
polyethylene, which is virtually maintenance free. A
minimal amount of care in storage and transporting
will help the kayak maintain a like-new condition for
many years.
Polyethylene will become more flexible when in warm
conditions such as a hot, sunny day. It is possible for a
kayak strapped tightly to a roof rack for a series of days
to temporarily deform at the weight bearing points. Use
a rigid bar sport rack in addition to a "kayak cradle" to
disperse the weight.
8
WHITEWATER KAYAK CARE
Whitewater kayaks are built to withstand more
aggressive use than recreation or touring models.
However, a certain amount of impact and abrasion
damage is to be expected due to the nature of
whitewater paddling. If you notice excessive wear or
gouging on the hull you should consider altering your
paddling technique to prolong the life of your kayak.
Continual exposure to abrasion can roughen the hull
surface. Scratching is often cosmetic or superficial and
requires no repair.
It is important to be able to determine when damage is
cosmetic or extends to impacting the structure of the
hull. Impacts are much more likely than scratches to
result in structural damage. Inspect your hull after
suffering a collision.
As durable as it is, polyethylene is not indestructible.
However, should the worst happen, it is repairable;
simply contact your local Dagger dealer.
Next to damage during use, the greatest threat to the
kayak is degradation due to UV exposure. The kayak
should be stored out of direct sunlight, as the polyethylene
will become more flexible in warm conditions.
CLEANING
Usually, a quick rinse of fresh water is all that is necessary
to keep your hull clean and functioning in good order.
This is very important after paddling in salt water,
especially if your boat is outfitted with a rudder system.
Be sure to thoroughly rinse the rudder, rudder cables,
and footbraces with fresh water to remove salt residue.
Superficial scratches may occur, but can be removed or
reduced by use of a marine boat polish designed for
polyethylene hulls. Sanding or use of an abrasive
rubbing compound is not recommended.
To keep your kayak shining and minimize the long-term
degradation caused by UV exposure, use an ultraviolet
protectant such as 303 Aerospace Protectant, available
at your local Dagger dealer.
:
WARNING
Avoid dragging kayak across the ground to
prolong its life and maintain its look and
performance. Two people, utilizing the carrying
handles, is the best way to transport a longer
kayak. Alternately, you can transport using a
kayak cart, available at your dealer.