Asus ZenScreen MB16AH Руководство пользователя - Страница 23
Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор Asus ZenScreen MB16AH. Asus ZenScreen MB16AH 24 страницы. Portable usb monitor
Печатать страницу
After connecting with the
USB Type-C source device,
the power LED lights
continuously blinking or
showing ASUS logo repeatly
*1: White color background will consume higher power, so it's better
to use white color background to test the power limit from source USB
Type-C device.
*2: If MB16AH does not re-start when adjusting to value 100, that means
source USB Type-C device has sufficient power supply.
ASUS Portable Monitor MB16AH
• Insufficient power supply from source
USB Type-C devices. Please follow below
steps:
• Move the 5-way key downwards continuously,
and then connect the USB Type-C cable.
This operation will enable built-in safe mode.
After displaying ASUS logo, please release
the Blue Light Filter button. After ASUS Logo
disappearing, there is "safe mode" message
OSD showing up. Once "safe mode" message
OSD disappears, please set background
color to white image or nearly white image
(*1).
• Press MENU button, main menu OSD is
showing. The upper left corner of the OSD will
display small red-colored font "S", indicating it
is now in safe mode. Enter brightness setup,
press the up key to tune up brightness. During
the process, please note down brightness
value "Y" up until MB16AH re-start.(*2). For
example, if brightness value shows "70" and
MB16AH restarts when adjusting to "71",
"70" is the "Y" value to note down and is the
highest brightness value for the connecting
USB-C source device.
• Press MENU button, main menu OSD is
showing. The upper left corner still indicate
"S" as safe mode. Adjust the OSD brightness
value to "Y"
• Close the OSD and press Low Blue Low
Filter hot key for 5 seconds to turn off safe
mode.
• Complete.
3-11