Asus ZenScreen MQ13AH Руководство пользователя - Страница 27

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор Asus ZenScreen MQ13AH. Asus ZenScreen MQ13AH 28 страниц.

Problem

After connecting with the

USB Type-C source device,

the power LED lights

continuously blinking or

showing ASUS logo repeatly

*1: White color background will consume higher power, so it's better to use

white color background to test the power limit from source USB Type-C

device.

*2: If MQ13AH does not re-start when adjusting to value 100, that means

source USB Type-C device has sufficient power supply.

3-12

Possible Solution

• Insufficient power supply from source USB

Type-C devices. Please follow below steps:

• Press the Up button , and then connect

the USB Type-C cable. This operation will

enable built-in safe mode. After displaying

ASUS logo, please release the Up button.

After ASUS Logo disappearing, there is "safe

mode" message OSD showing up. Once "safe

mode" message OSD disappears, please set

background color to white image or nearly

white image (*1).

• Press MENU button, main menu OSD is

showing. The upper left corner of the OSD will

display small red-colored font "S", indicating it

is now in safe mode. Enter brightness setup,

press the up key to tune up brightness. During

the process, please note down brightness

value "Y" up until MQ13AH re-start.(*2). For

example, if brightness value shows "70" and

MQ13AH restarts when adjusting to "71",

"70" is the "Y" value to note down and is the

highest brightness value for the connecting

USB-C source device.

• Press MENU button, main menu OSD is

showing. The upper left corner still indicate

"S" as safe mode. Adjust the OSD brightness

value to "Y"

• Close the OSD and press Up hot key for 5

seconds to turn off safe mode.

• Complete.

Chapter 3: General Instruction