Asus AAM6030EV Руководство с инструкциями по быстрой настройке - Страница 9
Просмотреть онлайн или скачать pdf Руководство с инструкциями по быстрой настройке для Сетевой маршрутизатор Asus AAM6030EV. Asus AAM6030EV 13 страниц.
Печатать страницуEnsure that the same security settings are used on your clients i.e. 128 Bit and use the same WEP key. The Pheenet setup
utility allows you to create the key from a Passphrase. As with the router ensure that you correctly observe character case (i.e.
lower or upper) when entering the passphrase. If your adapter key setup doesn't have this passphrase feature than you must
manually copy the key numbers from the router setup (e.g. 'WIRELESS' is cd 9a d2 b7 19 8a 75 7c c7 41 0c 39 c0).
Now save the settings for your client (as before you may need to reboot your computer for the changes to take effect).
If all's gone according to plan your wireless client should now be able to see the VI router:
If your wireless adapters have a signal strength utility then this can be used to check how good a signal you are getting from
the VI router:
If your clients cannot see the router but they could with security off (see above) then the reason for it not working now will be
because you've made a mistake with the security setup of either your router or client. Take great care typing in the security
settings, particularly the WEP key. A single number wrong and it won't work! You probably won't even be able to use the
signal strength utility to 'see' the router.
3.2.3 Using a PCMCIA Wireless card
Setup for the PCMCIA Card (based upon the Pheenet WL-0011 PC card) follows the same guidelines as per using the PCI card
i.e. ensure that all settings for VI router and the PCMCIA card are the same. Get any setting incorrect and the chances are it
- 10 -