Doughpro DP3300 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Doughpro DP3300. Doughpro DP3300 12 страниц. Electro-mechanical automatic dough press

Печатать страницу

PRESSING DOUGH:

First allow the upper platen to reach

programmed temperature. In most

cases, 150°F (65.5°C) is ideal, but trial

and error testing will determine the best

temperature for your dough.

For best results, your dough should be

proofed before pressing, but it will also

press directly out of your refrigerator.

Flour is not required to press a crust

and should not be dusted on any part of

the machine.

Determining the proper timer setting

also requires some trial and error until

you obtain the correction thickness and

diameter of your product. Start with five

(5) seconds and go up or down from

there. Remember that the timer does

not actuate until the upper platen mates

with the lower platen and resistance is

felt.

1. Apply a quick spray of a good

2. Place your pre-portioned ball of

3. Close the platen and, with both

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

water based food release on the

lower platen. Doughpro offers

its own food release spray

NATURALLY CLEAR Model

No. DPPC1. (See our catalog

and price list for information.)

Note: This spray will not affect

the taste of your crust in any

way.

dough in the approximate center

of the lower platen. Add another

dash of spray to the top of the

dough ball.

hands, press the two green

buttons on the face of the press.

4. Hold the buttons in until

resistance is felt then release at

once. The timer will actuate and

when the time cycle is

completed, the upper platen will

rise automatically (timer is preset

at factory for six (6) seconds, but

this is easily changed by

following the upcoming

instructions.)

5. Remove the crust, place on disc,

screen, pan or peel, add toppings

and bake.

ADDITIONAL NOTES:

Temperature

Note

Fahrenheit/Centigrade (Celsius)

Conversion

The temperature controller can

be programmed to display either

°F or °C. To change: Press the

MODE button until the

temperature is displayed, then

push and hold the SET button for

10 seconds.

Timer

• The controller has a count down

timer that automatically activates

a buzzer at the completion of the

application.

• Timer display is minutes:

seconds. Range is 00:00 to

10:00; Colons (:) flash while

timer is running.

-4-

DP3300 1410/20003/40002 5/03