Electric Eel RF Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ультразвуковой очиститель ювелирных изделий Electric Eel RF. Electric Eel RF 8 страниц. Drain cleaning machine
Печатать страницу
8. If tool becomes hung up in the
obstruction, move control lever to
the REVERSE position to back
out tool. (See Figure #5)
Figure 5
9. After tool has been removed
from obstruction, move control
lever back to the FORWARD
position and continue to work
through obstruction.
10. To retrieve cable from line,
move control lever to the
REVERSE position (while
continuing to operate cage in
forward rotation) and cable will
back out of line and feed into
cage.
NOTE: It is recommended to use a
continuous flush of water to clean
tool, cable and sewer line as cable is
retrieved.
11. When tool is close to cleanout
opening, return Control Lever to
NEUTRAL position, place switch
in OFF position, release foot
actuator and allow machine to
come to a complete stop.
DISCONNECT POWER CORD.
12. Pull remaining cable and tool
from drain line and hand-feed
cable back into machine.
MAIN SEWER OR SEPTIC
TANK OVERUN
Operator should determine the
approximate distance from cleanout
opening to the main sewer or septic
tank. Overrunning cable into these
areas can cause cables to twist or
knot-up preventing their retrieval.
8