Asus RT-AC68U Краткие руководства по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткие руководства по эксплуатации для Сетевой маршрутизатор Asus RT-AC68U. Asus RT-AC68U 2 страницы. Wireless-ac1900 dual band gigabit router
Также для Asus RT-AC68U: Руководство по настройке (7 страниц), Руководство пользователя (47 страниц)
Печатать страницу
AiMesh
SETUP STEPS
01
Prepare
Place your AiMesh router and node within
1-3 meters of each other during the setup
process.
02
AiMesh node
Factory default status. Keep power on
and standby for AiMesh system setting.
2
Go to Network Map page, click AiMesh icon
and then Search for your extending AiMesh
node.
** If you cannot find the AiMesh icon here, click on firmware
version and update the firmware.
AiMesh
Network Map
Find AiMesh node
Search
AiMesh node
TROUBLE SHOOTING
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check followings and try again.
a
Move your AiMesh node closer to the AiMesh
router ideally. Ensure it is within 1-3 meters.
b
Your AiMesh node is powered on.
c
Your AiMesh node is upgraded to AiMesh
supported firmware.
RELOCATION
THE BEST PERFORMANCE
Locate AiMesh router and node at best place.
To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens.
NOTE:
We recommend that you place the routers in an open or spacious location.
ASUS ROUTER APP
Download free ASUS Router
APP to setup and manage
your router(s).
ASUS Router
02
AiMesh node
3
Click Search, it will automatically search for
your AiMesh node. When the AiMesh node
5
shows on this page, click it to add it into the
AiMesh system.
** If you cannot find any AiMesh node, please go to "TROUBLE SHOOTING".
AiMesh
AiMesh
Find AiMesh
Find AiMesh
RT-ABCDE
RT-ABCDE
2%
34:97:F6:5F:6C:50
34:97:F6:5F:6C:50
Cannot find any router?
Cannot find any router?
c
i.
Download AiMesh - supported firmware at
https://www.asus.com/AiMesh/
ii.
Power on your AiMesh node and connect it to your PC via
a network cable.
iii.
Launch a web GUI. You will be redirected to the ASUS
Setup Wizard. If not, navigate to http://router.asus.com
iv.
Go to Administration
Firmware Upgrade. Click on
Choose
File, and upload the AiMesh-supported firmware.
Firmware Upgrade
Administration - Firmware Upgrade
Firmware Version
Product ID
RT-ABCDE
Firmware Version
3.0.4.382_12345678
Check
New Firmware File
Choose File
Upload
03
within
1-3 meter
AiMesh router
4
A message is displayed when synchronization
is completed.
Successfully added
RT-ABCDE
to your AiMesh system,
it will take awhile to show up as connected in the AiMesh
router list.
OK
v. After firmware uploaded, please go to Network Map page
to confirm whether AiMesh icon showed up.
AiMesh
Network Map
Find AiMesh node
Search
AiMesh node
FAQ
FREQUENTLY ASKED QUESTIONS
Q1
Does the AiMesh router support Access Point mode?
A : Yes. You can choose to set the
AiMesh router as router mode or access
point mode. Please go to web GUI
( http://router.asus.com ), and go to the
page Administration
Operation Mode.
Q2
Could I setup wired connection between AiMesh routers (Ethernet backhaul)?
A : Yes. AiMesh system supports both
wireless and wired connection between
AiMesh router and node to maximize
throughput and stability. AiMesh
analyzes the wireless signal strength for
each frequency band available, and then
determines automatically whether a
wireless or wired connection is best to
serve as the inter-router connection
backbone.
03
AiMesh router
1
Refer to ONE ROUTER SETUP STEPS to connect
your AiMesh router to your PC and modem, and
then log in into the web GUI.
Modem
AiMesh router
AiMesh node
5
Congratulations! You will find the pages below
show up when an AiMesh node has been
successfully added to the AiMesh network.
AiMesh
AiMesh routers in your network
RT-ABCDE
34:97:F6:5F:6C:50
vi. Press the reset button on your AiMesh node for atleast 5 seconds.
Release the reset button when the power LED is flashing slowly.
Operation Mode
Administration - Operation Mode
Save
1
Follow the setup steps to establish a connection between the
AiMesh router and node via Wi-Fi first.
2
Place the node in the ideal locations for best coverage. Run an
Ethernet cable from the LAN port of the AiMesh router to the
WAN port of AiMesh node.
LAN-WAN
3
AiMesh system will auto-select the best path for data transmission,
whether wired or wireless.