Baumer HMG11 N13 Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Медиаконвертер Baumer HMG11 N13. Baumer HMG11 N13 41 страница. Absolute encoders with profinet interface

Печатать страницу

3. Commissioning

3.1. Electrical connection

3.1.1.

Cabling

PROFINET utilizes Fast Ethernet cable (100MBit, Cat 5) composed of four wires AWG22 (white, yellow, blue

and orange).

There are three types of PROFINET cables:

•

Type A – for fix or rigid cabling

•

Type B – for occasional movements or vibrations (flexible)

•

Type C – for permanent movements (highly flexible).

3.1.2.

Connecting the bus cover

The bus cover provides three M12 connectors.

Two M12 connectors (D-coded, according IEC 61076-2-101) serve for PROFINET connection.

•

For voltage supply use A-coded M12 connector only.

•

For the bus lines both D-coded M12 connectors may be used at will. However, together with a planned

Topology it may be necessary to observe the correct assignment (P1/P2).

•

Seal up the unused cable gland using a sealing bolt (included in the delivery).

There is no need to proceed any manual settings inside the bus cover. PROFINET does not require setting a

node ID and terminating resistor like Profibus. All address parameters are configured by the engineering tool

(e.g. Siemens

Step7

Pin assignment

Supply voltage

1 x M12- connector (male)

A-coded

Assignment

UB (9...30 VDC)

N.C.

GND

N.C.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

Multi-color LED

Indicating the operating status,

green-yellow-red

Activity – LEDs (green)

to signal bus activity on

Port1, Port2

Port1

Port2

Wire color

brown

white

blue

black

PROFINET (data communication line)

2 x M12-connector (female)

D-coded

Assignment

TxD+

RxD+

TxD-

RxD-

7/41

Wire color

yellow

white

orange

blue