Baumer HUBNER BERLIN HOG 10 Инструкции по монтажу и эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Инструкции по монтажу и эксплуатации для Медиаконвертер Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 страниц. Incremental encoder with connecting cable ölfle
Также для Baumer HUBNER BERLIN HOG 10: Руководство по установке и эксплуатации (36 страниц), Руководство по установке и эксплуатации (40 страниц), Руководство по установке и эксплуатации (40 страниц), Инструкции по монтажу и эксплуатации (40 страниц), Инструкции по монтажу и эксплуатации (40 страниц), Инструкции по монтажу и эксплуатации (32 страниц), Инструкции по монтажу и эксплуатации (36 страниц), Инструкции по монтажу и эксплуатации (36 страниц), Инструкции по монтажу и эксплуатации (28 страниц)

Печатать страницу
Baumer HUBNER BERLIN HOG 10 Инструкции по монтажу и эксплуатации
2

Security indications

2.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
2.2
Risk of destruction due to electrostatic charge
Electronic parts contained in the device are sensitive to high voltages.
• Do not touch plug contacts or electronic components.
• Protect output terminals against external voltages.
• Do not exceed maximum voltage supply.
2.3
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device. The mounting instructions must be
followed.
• It is essential that the specified clearances and/or angles are observed.
2.4
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the sensing system.
• Never use force. Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
2.5
Risk of destruction due to contamination
Dirt penetrating inside the device can cause short circuits and damage the sensing system.
• Absolute cleanliness must be maintained when carrying out any work on the device.
• Never allow lubricants to penetrate the device.
2.6
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the sensing system and the ball bearings. Dismounting a device,
secured to a shaft by adhesive may lead to the destruction of the device.
2.7
Explosion risk
Do not use the device in areas with explosive and/or highly infammable materials. They may ex-
plode and/or catch fre by possible spark formation.
MB071.1T2 - 11069399
Baumer_HOG10-FSL-T2_II_DE-EN (17A2)
Security indications
2
4