Douglas Dynamics 77750 Руководство по установке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Douglas Dynamics 77750. Douglas Dynamics 77750 17 страниц. Snowplow
Печатать страницуA‑FRAME TO BLADE ASSEMBLY
1. Align the pivot bolt hole on the A‑frame with the
pivot bolt hole on the quadrant.
2. Install the pivot bolt from the top. Secure with a
1" locknut (found in the parts bag) and tighten the
locknut as much as possible while allowing the
A-frame and quadrant to pivot.
3. Move the snowplow into a normal operating
position.
Lit. No. 52238, Rev. 05
INSTALLATION INSTRUCTIONS
1" x 4" Clevis Pins
1" x 9"
Pivot Bolt
1" Locknut
(in parts bag)
4. Remove the protective packaging from the angle
rams.
5. Align the holes in the rod end of the angle ram
with the corresponding holes on the back of the
quadrant.
6. Install a 1" x 4" clevis pin (from the shipping
bracket) from the top down to attach each rod.
Secure the clevis pins with 1/4" x 1‑1/2" cotter pins
from the parts bag.
1/4" x 1-1/2"
Cotter Pin
7
July 15, 2020