Douglas Dynamics WESTERN ENFORCER 97540 Руководство по установке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке для Снегоуборщик Douglas Dynamics WESTERN ENFORCER 97540. Douglas Dynamics WESTERN ENFORCER 97540 19 страниц. Ultramount 2 snowplow

Печатать страницу

OPERATIONAL TEST AND FINAL ADJUSTMENTS

9. Connect the tenth link from the end of each lift

chain to the lift arm hook.

Lift Chain

(PS)

10. Completely extend and retract the driver-side

wing several times. Repeat for the passenger‑side

wing. With both wings fully retracted, raise and

lower the snowplow several times. Activate the

control FLOAT function and completely collapse

the lift ram manually. Turn the control OFF.

AeroShell

is a registered trademark (

Lit. No. 74914, Rev. 01

Lift Chain

(DS)

Lift Arm

Hook

) of Shell Oil Company.

Do not mix different types of hydraulic fluid.

Some fluids are not compatible and may

cause performance problems and product

damage.

11. Remove the fill plug and check the fluid level.

With the snowplow wings and lift ram fully

retracted, the fluid level should reach the fill hole.

If additional fluid is needed, fill the reservoir with

WESTERN

High Performance Hydraulic Fluid

to –40°F (–40°C), or other fluid conforming to

Military Specification MIL-H-5606 A, such as

Mobil Aero HFA or Shell AeroShell

FLUID CAPACITY

• FloStat

Unit Reservoir

• FloStat System Total

NOTE: Loosen fill plug slowly to relieve any

pressure in the reservoir.

NOTE: Add fluid only when all rams are retracted.

12. Replace and tighten the fill plug.

13. Proceed to the Blade Drop Speed Adjustment

step.

CAUTION

Fluid 4.

1-3/4 quarts

2-1/8 quarts

June 1, 2020