Amphenol Socapex RJSMLAC 8UG CAPS Руководство пользователя аппаратного обеспечения - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя аппаратного обеспечения для Сетевой маршрутизатор Amphenol Socapex RJSMLAC 8UG CAPS. Amphenol Socapex RJSMLAC 8UG CAPS 13 страниц. Ip68 rugged unmanaged ethernet switch, amphenol rj-switch

Печатать страницу

Backshell

Plug size

A length

mm (in)

35.60

9 (A)

(1.402)

1. Prepare the cable for termination process and slide onto

the cable the items in the order shown on figure 1.

2. Screw the backshell at the rear of the connector.

3. Fold back the braid on the outer jacket and fix it (figure

2).

4. Install the braid as shown on figures 3 and 4:

Release the braid and cover the backshell (a) and the

connector's shell. Slide the first ring (b) over the braid. Fold

back the braid on the ring (b) and slide the second ring (c)

over the braid and the first ring (b). Screw the last ring (d)

at the rear of the backshell. If necessary, fix the extra braid

on the outer jacket of the cable. If this installation (double

folding of the braid) is not possible, refer to figure 5: Slide

the first ring (b).

Release the braid and cover the backshell (a) and the

connector's shell. Cut the braid as shown. Slide the second

ring (c) over the braid and the first ring (b).

Screw the last ring at the rear of the backshell.

5. Install the heat-shrink molded piece.

RJSMLAC 8UG CAPS UM rev. 1

Amphenol

– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 –

www.rjswitch.com

We suggest using TVNSA backshells with corresponding heat shrinks.

These backshells, providing an electrical continuity between cable and connector, ensure a

high level or of EMI/RFI protection. The sealing is ensured by straight heat shrink molded

piece at the rear of the backshell. NSA and SA backshells ensure the shielding by

clamping the braid with a screwing system. The free inner ring avoids twisting of the braid

during screwing.

Heat-shrinks are molded pieces for harsh environment, fluid resistant (with preinstalled

adhesive).

Backshell designation: TVNSA 09 014

Heat shrink designation: 804221

A thread

B max

Metric

mm (in)

16.70

M12x1.0

-6H

(0.658)

TVNSA backshell dimensions

C max

mm (in)

6.90

(0.272)

TVNSA backshell assembly instruction

Page 8 of 13

Ø E max

Ø G max

mm (in)

15.62

16.50

(0.615)

(0.650)

Last Rev: 27-Jun-13