Dover HYDRO DM-500 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Диспенсер Dover HYDRO DM-500. Dover HYDRO DM-500 14 страниц. Warewash dispenser
1.OO overview
Safety Precautions
WARNING! Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.
protective clothing and eyewear when dispensing chemicals or other materials or when working in the
WEAR
vicinity of all chemicals, filling or emptying equipment, or changing metering tips.
observe safety and handling instructions of the chemical manufacturer.
direct discharge away from you or other persons or into approved containers.
dispense cleaners and chemicals in accordance with manufacturer's instructions. Exercise CAUTION when
ALWAYS
maintaining your equipment.
reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or
latched into position.
KEEP
equipment clean to maintain proper operation.
if the unit is used to fill a sink, or the discharge hose can be placed into a sink, the unit must mounted be so
NOTE
the bottom of the cabinet is above the overflow rim of the sink.
1.O1 Package Contents
DM-500 Warewash Dispenser (part number varies by model)
• DM-500 Dispenser
(Part number varies by model)
• Quick Start Guide (P/N HYD10099668)
• Accessory Kit: Mounting hardware, injection fittings, and tubing
(Part number varies by model)
• Pump Squeeze Tubes (not installed)
Detergent pump uses Santoprene
Rinse pump uses silicone tubes as standard
(Part numbers vary by model)
1.O2 Operation
The DM-500 is a globally versatile, dual product dispenser used to supply detergents and rinse aid into automatic dish
machines. Designed with simplicity in mind, the unit can be installed in minutes and requires no programming; all settings
can be configured using potentiometers that control the time or speed of dosing (depending on the model). The unit has the
reliability and accuracy you expect from Hydro Systems Co. at an economic price point.
NOTE! The DM-500 is intended for use in industrial applications. It is not suitable for domestic use, and it must not be used
outside of its intended use. The product must only be used for commercial dish washing operations. The manufacturer waives
any responsibility arising from incorrect usage or transportation.
1.O3 General Specifications
Category
Electrical
Chemical Temperature Rating
Regulatory Approvals (CE)
Regulatory Approvals (UL / CSA)
Cabinet Material
Environmental
Dimensions
4
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS
Please use this equipment carefully and observe all warnings and cautions.
tubes as standard
®
Specification
90 to 260 VAC at 50/60Hz
Intake chemicals should be at room temperature
89/336/CEE
73/23/CEE
UL 778:ed6-2016
CSA C22.2 No.108:14
Front: Polypropylene - Rear: Polypropylene
Pollution: Degree 2, Temperature: 50° to 104° F (10° to 40° C), Maximum Humidity: 95% Relative
9.2 in (235mm) High x 9.3 in (237mm) Wide x 5.4 in (137.5mm) Depth
Regarding "Electromagnetic Compatibility" and the subsequent modifications
to 92/31/CEE, 93/68/CEE, 93/97/CEE
Regarding "Low Voltages", and the subsequent modifications to 93/68/CEE,
2002/95/CE, 2002/96/CE, 2003/108/CE "RoHs and WEEE Directive"
Standard for Motor-Operated Water Pumps
Liquid Pumps