Advanced Axis AX-I/O-48 Руководство по установке - Страница 15

Просмотреть онлайн или скачать pdf Руководство по установке для Блок управления Advanced Axis AX-I/O-48. Advanced Axis AX-I/O-48 20 страниц. Switch led modules

Печатать страницу

Advanced Axis AX-I/O-48 Руководство по установке

If you were programming a zone alarm LED you would select "Single Zone", then you would select the zone number

that will activate this LED (default zone 1). If we wanted to distinguish this LED if this were the first zone to alarm in

the system, you could check the box next to "Flash if Fire Started Here". As the default activation Qualifier is for an

alarm condition no further programming is required, when an alarm occurs in zone 1, the associated red LED will

illuminate.

If you wanted to also program a zone trouble LED, you would click on the yellow LED, the yellow LED would

illuminate and the LED Operation area will open up on the bottom left-hand side of the screen:

Within the LED Operation area, you would assign a Function Description for the LED and click on the "Unused"

description, within the Primary Activation Operating Method and a drop down menu will appear. You would then

select Single Zone:

After selecting "Single Zone", you would select the zone number that will activate this LED (default zone 1).

Note: All LEDs default to an Alarm qualifier, so if you want to program the LED to activate from a trouble

you need to remove (uncheck) the Alarm qualifier and add the trouble qualifier (check).