Amphion FlexAmp500 Справочное руководство - Страница 6

Просмотреть онлайн или скачать pdf Справочное руководство для Акустическая система Amphion FlexAmp500. Amphion FlexAmp500 12 страниц.

Back panel connections

Input +4dB (L and R)

These are the balanced inputs for your stereo signal. If you are using an unbalanced source, it is

recommended to connect XLR pin 3 to pin 1.

Main out (L and R)

These are the outputs for your main power amp and speakers. If you are using an unbalanced destination,

it is recommended to leave XLR pin 3 unconnected.

LFE input

This is a direct input for a separate LFE signal (such as the .1 in a 5.1 monitoring setup). Sensitivity is +10dB

compared to the main inputs, and there is no built-in low pass filtering applied. In other words, the crossover

frequency does not affect this signal. The LFE level is also not affected by the front panel level setting.

LFE link out

This connector is provided for chaining the LFE signal across several BaseAmp units (typically in a multichannel

setup).

Base out

Neutrik Speakon (NL4FX) 4-pole speaker output for the FlexBase25 tower.

IEC power connector

Power input, auto switching in the 100-240V range, internally fused.