FOLKSAFE FS-HD2103E-KVM Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Удлинитель FOLKSAFE FS-HD2103E-KVM. FOLKSAFE FS-HD2103E-KVM 8 страниц.

Quick Setup Guide

Package Contents

1) FS-HD2103E-KVM-TX/FS-HD2103E-KVM-RX: 1 set

2) Infrared module (receiving and transmitting): 1 set

3) 12V/1A power adaptor: 1pc

Installation Steps

1. Connect the male end of HDMI cable to video source.

Connect the female end of HDMI cable to "HDMI IN" of FS-HD2103E-KVM-TX.

Connect UTP cable to RJ45 port of FS-HD2103E-KVM-TX.

Connect the other end of UTP cable to RJ45 port of FS-HD2103E-KVM-RX.

2. Use another HDMI cable, connect the male end to "HDMI OUT" of FS-HD2103E-KVM-RX,

then connect the other end to a display device which has an HDMI interface;

According to different video source devices, please insert the keyboard and mouse which are with USB

interface into the USB port or insert an IR receiver module to the "IR-IN" port.

3. Make sure the connections mentioned above are finished properly.

Then please power up to the FS-HD2103E-KVM-TX with 12VDC.

The power indicator of the relative equipment & FS-HD2103E-KVM-RX will be red.

The HDMI link indicator for both side of the devices will be green.

If the display device works with good image, that means the whole connection is successful.

4) User manual: 1pc

5) USB cable: 1pc