Follett 400 Series Руководство по установке и обслуживанию - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Льдогенератор Follett 400 Series. Follett 400 Series 20 страниц. Icemaker and top kit for remcor/cornelius countertop ice and beverage dispensers
Печатать страницуSatellite-fill icemaker installation
18. Ice transport tube chase may be located
behind or to either side of the dispenser
(Fig. 10 and 11). Using the chase
mounting bracket (Fig. 12) as a template
mark the counter for the ice transport
tube(s) in one of the locations shown in
Fig. 10 and 11. Within the template outline
drill one 2.25" (58mm) to 2.375" (61mm)
hole for each ice transport tube. Secure
the chase mounting bracket to the counter
using supplied screws (Fig. 12).
Single tube – Fig. 10
22" (559mm) dispenser
24" (607mm) dispenser
30" (762mm) dispenser
Double tube – Fig. 11
22" (559mm) dispenser
24" (607mm) dispenser
30" (762mm) dispenser
44" (1118mm) dispenser
Dimension A
Dimension B
11.00" (280mm)
8.00" (242mm)
12.00" (312mm)
9.00" (299mm)
15.00" (762mm) 12.00" (343mm)
9.50" (242mm)
8.00" (204mm)
10.50" (273mm)
9.00" (242mm)
13.50" (343mm) 12.00" (305mm)
20.50" (521mm) 19.00" (483mm)
Fig. 10 – Single ice tube dispensers
A
1.25" (32mm)
1.25
(32mm)
Fig. 11 – Double ice tube dispensers
A
1.25" (32mm)
1.25
(32mm)
Fig. 12
11
rear entry chase
B
6"
(153mm)
2.25" (57mm) -
1.25"
2.375" (61mm)
(32mm)
dia. hole
typical
front
rear entry chase
B
6"
(153mm)
2.25" (57mm) -
1.25"
2.375" (61mm)
(32mm)
dia. hole
typical
front