Combi Baby Keep Slim W65 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для новорожденных Combi Baby Keep Slim W65. Combi Baby Keep Slim W65 11 страниц.
Печатать страницу
This manual describes the details of "Daily Inspection" and "Periodic Inspection" required to use Combi Baby Keep Slim
safely and comfortably. Follow the contents of this manual and make sure to carry out daily or weekly inspection and pe-
riodic inspection every year correctly.
Warning
Carry out daily inspection and periodic inspection once a year to ensure safety. Failure to do so may cause an injury or seri-
ous accident caused by undiscovered deterioration or damage to the product.
Daily inspections are carried out by visual and touch.If any abnormality is found
Daily Inspection
in the inspection, use a tool to perform the inspection depending on the case.
Periodic Inspection
Each part is inspected every year using a tool.
As a result of the inspection, parts may need to be replaced.
*The stock period of the repair parts is 5 years after the final production.
Required Tools
Phillips Screwdriver
Flat-Head Screwdriver
No.2, No.3
1
Daily Inspection
Daily inspection should be carried out daily or weekly. Inspections are done by visual and touch.
If any abnormality is found in the inspection, use a tool to perform the inspection depending on the point.
● If any abnormalities are found during inspection, stop using the product and contact your dealer to request repair.
A. Checking the Appearance
Inspection Points
①
Looseness of the main body
②
Looseness of the guard
③
Looseness of back cushion
④
Detachment of plastic cap
⑤
Scratches or breakage of the main body
⑥
Scratches or damage of the back cushion material
⑦
Soil on main body
⑧
Soil on back cushion material
Looseness of the Guard
②
Confirm that there is no looseness in
the guard after shaking the guard to
left and right.
Also, confirm that there is no loosness
in the guard after open and close the
guard several times.
Combi Baby Keep Slim
Inspection Manual
Prepare the following tools.
Wrench
(nominal 17MM)
Common for Combi Baby Keep SlimF62/W62/W65 for train. (Below diagram is Combi Baby Keep Slim F62)
Inspection Method
Visual and touch
Visual and touch
Visual and touch
Socket Wrench
Judgment Criteria
Motion,
No looseness when the main body
is being shaken.
Motion,
When the guard is shaken by hand,
there should be no rattling.
Motion,
When the back cushion is shaken by
hand, there should be no looseness.
Visual
No peeling or missing
Visual
No serious scratch or damage
Visual
No severe cut or damage
Visual
No soiling
Visual
No soiling
4
Daily or Weekly
Once a Year
Caution
Do not use the power tool when fasten-
ing the product. Make sure to tighten by
hand and do not use the power tool.
Any use of the power tool may result in
damage to the plastic part.
Handling of Defects
Retightening (see page 6
and 9 of periodic inspection)
Repair
Replacement
Replacement
Repair
Replacement
Cleaning
Cleaning