Combi F72 Руководство по эксплуатации и руководство по проверке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и руководство по проверке для Мебель для новорожденных и детей Combi F72. Combi F72 8 страниц. Baby keep fit

Печатать страницу

Periodic Inspection

Periodic inspection is conducted periodically once a year.

● If any abnormalities are found during inspection, immediately stop using the product and contact your dealer

to request repair.

A. Checking Attachment / Detachment and Looseness of Various Screws

(when Combi Corner Bracket F31 (hereinafter, Corner Bracket) is not used)

Inspection Points

❶

Anchor bolts (3 locations)

❷

When installed on a partition

Tapping screws (4 locations)

When mounted on concrete or ALC

Screws for concrete (2 locations)

Anchor bolts (2 locations)

❸

Bottom cover fixing screws (2 locations)

❶ Checking Anchor Bolt

①

Use a flat-head screwdriver to remove

2 plastic caps, and then use a Phillips

screwdriver No3 to remove 2 screws

securing the lower cover.

②

Use a wrench (nominal 17MM) and

check the anchor bolts (3 locations)

are not missing or loosen.

❷ Checking Tapping Screws, Concrete Screws, and Anchor Bolts.

①

Remove the back cushion. For

disassembly the back cushion,

refer "Back Cushion Replacement

Procedure" on the back cover.

Back cushion

❸ Checking Lower Cover Fixing Screw.

After checking, assemble in the reverse procedure.

When assembling, make sure that lower cover fixing

screws (2 locations) and plastic caps (2 pcs.) are not

missing or loosened.

After the assembly is completed, inspect it by

referring to the Daily Inspection (page 4).

Use Phillips screwdriver No3, flat-head screwdriver

(Wrench (nominal 17MM)

(Phillips screwdriver No2, No3)

(Phillips screwdriver No3)

When installed on a partition

Use a Phillips screwdriver No2 to

check 4 tapping screws are not

missing or loosened.

Back plate

Tapping screws

(4 locations)

Inspection Method

Visual, Touch

Visual

Bottom cover fixing

screws (2 locations)

Plastic cap

Bottom cover fixing

screws (2 locations)

Plastic cap (2 pcs)

Judgment Criteria

No missing or looseness

Lower

cover

When mounted on concrete or ALC

Use a Phillips screwdriver No2 to check

the screws for concrete (2 locations). Use

Phillips screwdriver No3 to check anchor

bolts (2 locations) are missing or loosened.

Screws for concrete

(2 locations)

Anchor bolts

(2 locations)

*Corner bracket is

sold separately.

Handling of Defects

Retightening

Main body

Anchor bolts

(3 locations)

Lower cover