Follett HCD1650RBT Руководство - Страница 3
Просмотреть онлайн или скачать pdf Руководство для Льдогенератор Follett HCD1650RBT. Follett HCD1650RBT 8 страниц. With remote air-cooled condensing unit
Также для Follett HCD1650RBT: Руководство по установке (17 страниц), Краткое руководство по эксплуатации (8 страниц)
Печатать страницу
Horizon
Chewblet ice machine
1
Locating the ice machine (continued)
Manufacturer
Model Number
4500-30N / IBD Chewable ice dispenser
FS-22N
Lancer
dispensers
FS-30N
FS-44N #
DB/ED/DF 200 series
DB/ED/DF 250 series
DB/ED/DF 300 series
Cornelius
dispensers
FlavorFusion/Overload
IDC215
IDC255
MDH-302
Servend
dispensers
MDH-402
*All approved dispensers can be filled with a RIDE model Horizon ice machine model without a top kit.
§
60- inch models: Please specify number of Horizon ice machines and location. D = 2; R = 1 on right side; L = 1 on left side
† Requires minimum 0.5" (12.7 mm) clearance between back of dispenser and wall.
** Net height after installation of top kit (excluding height of ice machine).
# F-44N consists of 2 separate 22" (55.9 cm) dispensers. A top kit is needed for each Horizon ice machine ordered.
2
Undercounter/in-cabinet mounting
Important specifier notes
1. Cabinet door opening
must meet minimum size
requirements shown and
be free of obstructions to
allow ice machine to slide
out (no lip or utilities to block
removal).
2. Cabinet base must be
capable of supporting ice
machine and allow ice
machine to rest flat on
cabinet bottom.
3. No counter supports, electric
or plumbing can run in front
of the ice machine.
4. Ice transport tube needs
minimum 1/4" per foot (2 cm
per meter) pitch toward ice
machine and should be
secured to prevent dips and
traps from forming. See
page 4.
Top mounting – compatible ice & beverage dispensers*
Width
in (cm)
30.0 ( 76)
22.0 ( 56)
30.0 ( 76)
44.0 (119)
30.0 ( 76)
30.0 ( 76)
44.0 (119)
30.0 ( 76)
30.0 ( 76)
30.0 ( 76)
42.8 (109)
60.0 (152)
Cabinet details
Ice transport tube
minimum 1/4" per foot
(2 cm per meter)
Cabinet door
pitch toward ice machine
opening
secure to prevent dips
and traps from forming
21"W x 24.5"H
(53 cm x 62 cm)
minimum
slides
out
Cabinet base
must be flat & free of obstructions
(no lip or utilities to block removal)
Follett Corporation
801 Church Lane • Easton, PA 18040, USA
+1 (610) 252-7301 • Fax +1 (610) 250-0696
www.follettice.com
1000 series 1400 series or 1650 series
with remote air-cooled condensing unit
Depth
Height**
in (cm)
in (cm)
30.5 (78)
36.50 ( 93)
30.5 (78)
42.13 (107)
30.5 (78)
42.13 (107)
30.5 (78)
42.13 (107)
30.0 (76)
34.38 ( 87)
30.0 (76)
38.38 ( 98)
30.0 (76)
34.00 ( 86)
30.7 (78)
39.38 (100)
30.7 (78)
39.38 (100)
30.7 (78)
36.38 ( 92)
31.0 (79)
32.38 ( 82)
30.5 (78)
32.38 ( 82)
12" (30 cm) minimum
between ice machine
and dispenser
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 • Fax +48 (58) 785-6159
www.folletteurope.com
Undercounter/in-cabinet mounting
Harmony top kit – specify "F" for front
facing, or "B" for backward facing
units
HTL30RC-F
HTL22RC-F
HTL30RC- (F or B)
(2) HTL22RC-F
HTC30RC-F
HTC30RC-F
HTC44RC- (F or B)
HTC30RC-10F-FF
HTC30RC-10F-IDC
HTC30RC-10F-IDC
HTS44RC- (F or B)†
HTS60RC- §(F or B)†
electric
see dispenser
specification
sheet for
water
installation
requirements
drain
Form# 3815
3