Follett Horizon Elite HCD1010NJS Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Льдогенератор Follett Horizon Elite HCD1010NJS. Follett Horizon Elite HCD1010NJS 8 страниц. Ice machine models with ride technology
installation instructions for drop-ins
Также для Follett Horizon Elite HCD1010NJS: Руководство по установке (17 страниц), Руководство (8 страниц)
Печатать страницу
3 – Horizon Elite ice machine mounting accessories
Optional wall mount bracket
23.00"
(58.4 cm)
4 – Horizon Elite drain - specifier guidelines
Drain details
6
Form# 7035
Optional machine stand
22.00"
(55.9 cm)
B
25.50"
(64.8 cm)
A - 15.875" (40.3 cm)
B - 19.375" (49.2 cm)
➊
2 ft x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
➋
3/4" MPT x 1" slip
➌
1" Stand pipe/drain
6.88"
(17.5 cm)
A
C
D
C - 13.00" (33.0 cm)
D - 21.00" (53.3 cm)
Minimum 8"
radius
Remote 1010, 1410 series ice machine
Important specifier notes
1. For secure wall mounting, specify
optional wall mount bracket.
2. Wall and fasteners must support the
weight of the ice machine, bracket,
supply water and ice. Use of a backing
board may be required with hollow wall
construction.
3. Machine stand mounting adds 6.88"
(17.5 cm) to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward
ice machine and should be secured to
prevent dips and traps from forming.
Important specifier notes: Where
code allows, follow recommendation
below.
1. Connect the silicone tubing to the ice
machine 3/4" drain barb
➊
.
2. Assemble the 3/4" barb x 3/4" FPT to the
3/4" MPT x 1" slip. Connect the other end
of the silicone tubing to the 3/4" barb
3. Connect the 1" slip fitting to the 1" stand
➌
pipe/drain
.
Note: Minimum 8" radius on silicone
drain line. Drain line from the ice machine
must have at least 1/4" per foot pitch
(6.4 mm/0.3 m).
Note: Stand pipe/drain provided by
others. All other components provided
with ice machine.
➋
.