Caraudio-Systems RL-CCC-PNP Руководство - Страница 5
Просмотреть онлайн или скачать pdf Руководство для Автомобильные аксессуары Caraudio-Systems RL-CCC-PNP. Caraudio-Systems RL-CCC-PNP 6 страниц. Interface for activation of factory rear-view camera input compatible with bmw vehicles with professional ccc navigation systems and factory pdc behind
Печатать страницу
2.4.
Camera video connection
Pin-assignment quadlock connector / CAB-TVAS40
Assignment
●
Red (Video signal)
● Black (Video ground)
No liability for vehicle wire colors and pin definition! Possible changes by the vehicle
manufacturer. The given information must be verified by the installer.
2.5.
Coding of rear-view camera
Press button "menu" while in main menu of the CCC for 5 seconds to code the navigation to
rear-view camera.
2.5.1. Reversing the coding of rear-view camera
The above described coding of rear-view camera can be reversed by pressing the button
"menu" for 5 seconds while in main menu of the CCC.
2.6.
Picture settings
For an acceptable display of the rear-view camera video the PDC function (optical) must be
set to OFF and camera function set to ON in the submenu of the CCC.
(Menu: Settings > Vehicle tires > Shunting Help > Image combinations)
3. Mode of operation
After engaging the reverse gear the rear-view camera will be displayed on the monitor
automatically. It remains on display until the vehicle reaches a speed of 20km / h. The rear
view camera can also be switched on or off manually by the PDC button. Even if the video of
the rear-view camera is visible, the acoustic warning signals of the factory parking sensors
are active.
Version 08.05.2018
Pin number
Pin 4 (Chamber A)
Pin 2 (Chamber A)
RL-CCC-PNP