Follett Horizon Elite HCD1810NHT Руководство по установке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по установке для Льдогенератор Follett Horizon Elite HCD1810NHT. Follett Horizon Elite HCD1810NHT 17 страниц.
Также для Follett Horizon Elite HCD1810NHT: Краткое руководство по эксплуатации (8 страниц), Руководство (8 страниц)
Печатать страницу
3.12
Dispenser diverter plate installation – CORNELIUS ED, DF and DB SERIES
ICE CHUTE
COVER
10-32 WASHER
Cornelius ED, DF and DB series only
These dispensers require the installation of an ice diverter at the dispenser opening.
• Disassemble chute assembly
• Discard factory restrictor plate
• Replace with alternate diverter plate (supplied)
3.13
Agitation adjustments –
These dispensers require modifications for compatibility with Chewblet ice. Agitation
times must be set to 1 second ON, 1 hour OFF and the ice restrictor plate must
be adjusted to the fully open position. See your beverage supplier for these
modifications.
BEFORE PROCEEDING
10
GATE MOUNTING PLATE
ICE DIVERTER
ICE CHUTE
10-32 NUT
Cornelius IDC and Flavor Fusion
remote condensing
STORAGE HOPPER
APPLY RTV TO THIS
SURFACE TO SEAL
TO HOPPER GATE
MOUNTING PLATE
GASKET
Prior to installing the louvered docking
assembly, ensure that the drain fitting is oriented
(right or left) correctly for your installation. An
optional straight drain fitting is also supplied.
You may need to remove the back panel of the
docking assembly in order to re-orient or change
the drain fitting. Replace back panel prior to
mounting the docking assembly.
HARMONY • TOP-MOUNT
FLANGE EXTENDS INTO
STORAGE HOPPER
THROUGH GATE
OPENING