Follett Horizon Elite HCD1810NJS Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Льдогенератор Follett Horizon Elite HCD1810NJS. Follett Horizon Elite HCD1810NJS 17 страниц. Ice machine models with ride technology
Также для Follett Horizon Elite HCD1810NJS: Краткое руководство по эксплуатации (8 страниц), Руководство (8 страниц)
Печатать страницу
Prepare the dispenser.
2.1
3.1
Dispenser preparation
4"
(101,6mm)
• Determine best route for ice transport tube run. Note: 12" (304,8mm) clearance is required.
• Drill 1 3/4" (44,5mm) hole through either side of dispenser
• Install gasket
➋
onto bulkhead fitting
• Attach bulkhead fitting with flat up
• Position and secure nut locking plate
• Verify installation of O-ring on stainless steel ice transport tube coupling
• Insert stainless steel ice transport tube coupling
cap
➑
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
before making connection to ease assembly
• Attach ice transport tube to coupling with supplied hose clamp
6
➌
➍
and tighten bulkhead nut
➏
with supplied screws
➐
into bulkhead fitting and secure with coupling
remote condensing
Dispenser preparation
Hot Water
160 F (71 C)
12"
(304,8mm)
min.
➊
➎
➐
➓
DROP-IN • RIDE Technology
3
➒