DOYMA Curaflex Nova Uno/M/Z Инструкции по установке - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по установке для Промышленное оборудование DOYMA Curaflex Nova Uno/M/Z. DOYMA Curaflex Nova Uno/M/Z 4 страницы. Gasket inserts

Печатать страницу
INSTALLATION INSTRUCTIONS
Curaflex Nova
Gasket inserts
®
2: Installing the gasket insert
Curaflex Nova
Uno/M/Z
®
Pull out the quick-release fastener and the opposite pin,
unfold the gasket insert and place it and place it around the
media line. Close the quick-release fastener. Reinsert the
pin.
4a: Installation with WR
concrete walls or pipe
sleeves
Curaflex Nova
Uno/M/Z
®
Push the gasket insert into the core bore/pipe sleeve until it
stops flush with the outer wall (water/pressure side).
4e: Installation in combi-
nation with a
Quadro-Secura
ADS
®
Curaflex Nova
Uno/M/Z
®
Prior to installation in a Quadro-Secura
ADS the fixing tabs
®
must be screwed onto the frame ring using a conventional
screwdriver.
www.doyma.com
Curaflex Nova
Uno/M/Z
®
Insulated pipes
In the case of insulated media lines, remove the insulation in
the area of the sealing insert before installation.
4b: Installation for double/
element walls - sealing
layer is the in-situ con-
crete (WR concrete)
Curaflex Nova
Uno/M/Z
®
Position the gasket insert in the sealing level of the wall. In
case of doubt in terms of where the sealing level is, clarify
the procedure with the planner or the wall manufacturer.
3: Insert the modular sealing rings
Curaflex Nova
Uno/M/Z
®
a
b
c
d
Remove the plug (b) from the modular sealing ring (a) and
fold the modular sealing ring insert around the cable/pipe
(c). Pull out as many layers as needed until the dividing
surfaces of the modular sealing ring insert touch but do not
overlap when closed around the cable/pipe.
The connection point of the modular sealing ring layers
may need to be cut with a blade to make it easier to
pull the layers out.
4c: Installation for double/
element walls – sealing
level is in outer concrete
facade
Curaflex Nova
Uno/M/Z
®
Position the gasket insert in the sealing level of the wall. In
case of doubt in terms of where the sealing level is, clarify
the procedure with the planner or the wall manufacturer.
Curaflex Nova
Uno/M/Z
®
Push the onion ring inserts into the sealing insert from the
side facing the water (!).
4d: Installation in combi-
nation with a Quadro-
Secura
Quick/H
®
Curaflex Nova
Uno/M/Z
®
Position the gasket insert to the inside of the basement.
Page 3