Follett Horizon HME14000ABT Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Льдогенератор Follett Horizon HME14000ABT. Follett Horizon HME14000ABT 16 страниц.
Печатать страницу
Prepare the installation site.
Provide drainage, water supply and electrical power to within 6 feet (2m) of
icemaker in accordance with local and national codes. Outdoor installation is
not recommended and will void warranty.
2.1
2.1
Installation site requirements
➊
Electrical
• HCC1000(A/W)HS 208-230/60/1-15 amps
• HCE1000(A/W)HS 230/50/1-15 amps
(HCE1000A/W Requires 15 amp circuit 1.50 mm
‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.
Potable water supply
• 10-70 psi (69-483kpa)
• 45 F to 90 F (7 C to 32 C)
• Follett recommends the use of an in-line water filtration system (item# 00130286)
Condenser water supply for water-cooled systems
• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)
• 45 F to 90 F (7 C to 32 C)
• 1.5 gallons per minute (5.68 liters per minute)
➍
Drain
• The drain line from the icemaker must have at least 1/4" per foot pitch (6,4mm/0,3m)
BIN • TOP-MOUNT
Stock Module Identification Plate
208264
Module No.
Product
Service No.
‡
2
wire)
➋
self-contained
Site preparation
HCE1000A/W
requires 15 amp circuit
1.50 mm
HCE1400A/W
requires 20 amp circuit
4.00 mm
➊
➋
➌
1/4˝
➍
1'
• HCC1400(A/W)HS 208-230/60/1-20 amps
• HCE1400(A/W)HS 230/50/1-20 amps
(HCE1400A/W Requires 20 amp circuit 4.00 mm
➌
2
‡
2
wire
‡
2
wire
NEMA
6-15
HCC1000A/W
NEMA
6-20
HCC1400A/W
‡
2
wire)
5