Follett FS100A Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Диспенсер для воды Follett FS100A. Follett FS100A 20 страниц. Ice and water dispenser

11. Pour SafeCLEAN Plus solution into bin lid access spout until solution reaches and remains level at the

spout neck. (Because the cleaning solution reaches the internal components via overflow into the ice

transport tube, it is necessary to add cleaning solution until it remains level at the spout neck.)

12. Allow the SafeCLEAN Plus solution to remain in unit for 15 minutes.

13. While machine is cleaning, remove top and right side panel to access and clean air-cooled condenser.

14. Submerge ice dispense chute in the remainder of SafeCLEAN Plus solution for 2 minutes. Rinse with

clean, potable water.

15. Drain system by lowering drain tube into bucket.

16. Secure drain tube into holder.

17. Fill and drain twice with potable water. Secure drain tube.

18. Place a bucket under the dispense chute and remove cap. Note: Some SafeCLEAN Plus solution will

remain and drain out when cap is removed. Reposition cap on bin lid spout.

19. Reinstall front panel, ice dispense chute, and drip tray.

20. Press and hold maintenance/clean switch to exit Maintenance Mode.

User Interface and Exterior Cabinet

1. Press and release maintenance/clean switch so that only "ICE" displays in the user interface to enter

Cleaning Mode (and disable dispensing).

2. Plastic parts, including the user interface, can be cleaned with a non-abrasive glass cleaner. Clean

stainless steel panels with stainless steel cleaner.

3. Press and release maintenance/clean switch to put unit back into service.

Dispenser and Ice Machine - 115 V, 230 V, 220 V