Ampro TECSHOW QUADBAR 18 Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Осветительное оборудование Ampro TECSHOW QUADBAR 18. Ampro TECSHOW QUADBAR 18 8 страниц. 18 led washer wall light bar
Печатать страницу2. SAFETY INSTRUCTIONS
For your own personal safety, please
read and understand this manual
completely before you attempt to
install or operate this unit!
•
Please keep this User Manual for future reference.
If you sell the unit to another user, be sure that he
also receives this instruction booklet.
•
Unpack and check the unit carefully that it has
not been damaged during transport before using
the unit.
•
Before operating, ensure that the voltage and
frequency of power supply match the power
requirements of the unit.
•
It's important to ground the yellow/green
conductor to earth in order to avoid electric shock.
•
The unit is for indoor use only in a dry location.
•
The unit must be installed in a location with
adequate ventilation, at least lm from adjacent
surfaces. Be sure that no ventilation slots are
blocked.
CAUTION! TAKE CARE USING THIS EQUIPMENT!
High voltage-risk of electric shock!
3. MAINTENANCE
Periodical to maintain the wash light:
•
Check the screw of the spare parts in order to use
well.
•
Clearing the dust and fragments of the inner
wash light, to keep the inner wash light clearly.
•
Clearing the lens.
•
Disconnect mains power before fuse replacement
or servicing.
•
Replace fuse only with the same type.
•
Make sure there are no inflammable materials
close to the unit during operation.
•
Use safety cable when fixing this unit.
•
In the event of serious operating problem, stop
using the unit immediately.
•
Never try to repair the unit by yourself. Repair
carried out by unskilled people can lead to
damage or malfunction.
•
Please contact the nearest authorized technical
assistance center and always use the same type
of spare parts.
•
Do not touch any wires during operation as high
voltage might be causing electric shock.
•
More dust, smoke and granular can cause
appearance of the wash light corrosively-even
cause overheated to damage equipment
•
ATTENTION: Before take the light apart, please
cut the power source.
English Version | Tecshow QUADBAR 18
P. 3