Ampro TECSHOW COSMO GO 12 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Ampro TECSHOW COSMO GO 12. Ampro TECSHOW COSMO GO 12 15 страниц. Compact led washer with battery
Печатать страницу
3. CONNECTION OF POWER/WIRE/SINGLE
The exclusive plug should be used between the
connection of light and power. And please confirm
if the rated voltage and frequency is accordance
with the power supply or not. Please reduce the
connected light numbers in order to avoid any
accident because of overlarge electric current
during operation, it is suggested that connected
lights should not be above 10pcs. Make sure
installation position is steady before fix the light.
Professional clamp should be used when the light is
reverse hanging, and drive the clamp into the screw
4. FEATURES
There are 4 buttons and 4 bit LED display on the
operation panel for choosing different working
modes. Choosing certain working mode via
pressing these buttons, and it shows up on the LED
displays.
5. OPERATION
1. When power is on, the digital LED display works
with red dots, when there is inputting DMX
signal, the dot will be shiny.
2. DMX address code setting: Press key "Menu",
when the digital LED displays d001~d512, then
press "Up" or "Down", you can set the address
code. The code ranges from 001-512.
3. IP code setting: Press key "Menu", when the
digital LED displays IP.01~IP.64, then press "Up"
or "Down", you can set the IP code. The code
ranges from 01~64.
P. 4
Tecshow Cosmo Go 12 | English version
hole wich in the bracket of the light. Make sure the
light will not fall from the truss, use the safety cable
go through the struss and bracket of the light as a
supporting, to avoid the light to fall down. There
is no entrance to the work area during mounting.
Periodically to checj if the safety cable has fretted
away or clamp is loosen. We will not take any
responsability which caused by the lighting fall of
unsteady hanging.
It´s prohibied to move the light by handle the clamp,
please move th light by handle.
4. Internal program running: There are 5 modes
internal program for choosing. Press key
"Menu", you can choose internal mode A1~A5:
A1 is to static color mode, A2 to LED jump
unction, A3 to LED rainbow function, A4 to LED
sound active function, and A5 to LED strobe
function A6 Auto run A7 scrolling effect.