Follett FZR Series Руководство по установке, эксплуатации и обслуживанию - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке, эксплуатации и обслуживанию для Морозильная камера Follett FZR Series. Follett FZR Series 20 страниц. Undercounter freezer
Installation
Installing legs – required
1.
Remove legs from plastic bag packed inside freezer.
2.
Tip freezer back and screw legs in all the way to stop (they will extend 1/8"
(3.175mm) below base of freezer).
3. Adjust legs as needed to level freezer in both directions. To access legs,
remove the lower front panel. Turn legs clockwise to extend legs.
Installation shelves – required
1.
Remove shelves and shelf brackets packed inside freezer.
2. Install shelf brackets in pilasters (insert top tab, squeeze and push in lower
tab).
Changing temperature controller settings – optional
Follett's temperature controller is pre-programmed with a -25 C (-13 F) set point
and degrees C display. The -25 C (-13 F) set point delivers a temperature range
of -23 to -25 C (-9 to -13 F).
Follett's controller set point can be changed to deliver up to a -15 C (+5 F)
temperature for applications where a lower temperature is not desired (i.e. ice
cream). See page 6 to change controller settings.
4
Installation
Fig. 1
Fig. 2
2
1
Fig. 3
FZR Series 00939124R00
3