DPA 4003 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Микрофон DPA 4003. DPA 4003 11 страниц. Omnidirectional microphones
Также для DPA 4003: Руководство пользователя (18 страниц), Руководство пользователя (13 страниц)

3529-A AND 3530-A KITS INCLUDE

2 x 4006

Omnidirectional Microphone, P48, matched (3530-A)

2 x 4003

Omnidirectional Microphone, 130V, matched (3529-A)

UA0836

Stereo Boom with Holders

2 x DD0251

Near-field Grid, Silver

2 x DD0297 Diffuse-field Grid, Black

2 x UA0777

Nose Cone

2 x UA0638

Windscreen for Ø16mm (0.63in) Microphone

2 x L110C

Acoustic Pressure Equaliser, 110mm (4.33in) Cylinder

2 x L30B

Acoustic Pressure Equaliser, 30mm (1.18in) Ball

2 x L40B

Acoustic Pressure Equaliser, 40mm (1.57in) Ball

2 x L50B

Acoustic Pressure Equaliser, 50mm (1.97in) Ball

2 x DAO0130 130V Microphone Cable, 5m (16.4ft) (3529-A)

HMA4000

Hi-Voltage Microphone Amplifier, 2 channel (3529-A)

CARE OF MICROPHONE

It is important to bear in mind the following points with regards to

mounting, microphone care and the use of accessories:

The microphone cartridge is tightly secured to the main body hous-

ing, and no attempt should be made to remove it. If a replacement

cartridge is required, contact your local DPA Microphones represen-

tative.

Types 4003 and 4006 are supplied with an additional Diffusefield

Grid DD0297 (see "Technical Description" and "Full Specifications").

On delivery, the normal protection grid is screwed on to the car-

tridge housing and normal finger torque is required to remove it. Do

not try to unscrew or tighten the protection grids with any kinds of

tools as both surface and thread might be damaged.

Use of windscreen is recommended when microphones are used in

dirty or dusty environments.

When not in use, the microphone should be disconnected and kept

in the case supplied.