Amprobe WT-80 Руководство пользователя - Страница 17

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Amprobe WT-80. Amprobe WT-80 20 страниц. Orp meter

The reading is not changed

• If the status is in "HOLD", release the status.

The reading is not changed

• Clean and re-calibrate the probe.

• Replace with a new probe.

Slow response

• Clean and re-calibrate the probe.

• Replace with a new probe.

Wrong real time

• The wrong real time display will not affect the measurement. Contact the

distributor to purchase battery and acquire replacement procedures.

Error code

E02 Reading is under the lower limit .

E03 Reading is over the upper limit .

E04 The original data error result in this error.

E12 Factory calibration data error.

Solution: Re-start meter might solve this error.

E31 Measuring circuit failure.

Solution: Re-start meter might solve this error.

E32 Memory IC failure.