Carcam G-800 Руководство по установке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Приборные камеры Carcam G-800. Carcam G-800 13 страниц.

3. Video Time Length ：

Options are; 2 minutes/ 3 minutes / 5minutes with factory

default set for 2 minutes. Video is recorded onto files of 2, 3 or 5 minute duration. The item is

highlighted in blue and pressing OK accesses the sub-menu which can be navigated using the

up & down buttons. When you have decided on the setting press OK to store it and the camera

will revert to the main system menu. Carcam.ie has set this to 5 minute duration as in our

opinion this is the best option.

4. Move Detect

：Move detect is a function where the camera will switch on and record

for a short duration when in stand-by mode (car parked or ignition switched off). It's useful as

a security device if someone tampers with the car or perhaps when the car is parked outside

your house. In this scenario, the camera will switch on automatically and record for a short

duration when the front camera lens picks up motion. Note: It's important to switch move

detect off before driving as failure to do so it will result in the camera only recording when it

detects motion! i.e. if the car was stopped at traffic lights or in traffic recording would cease

in this setting. The move detect options are: on/off and default is off.

5. White Balance

： Several adjustments are available with "Auto" the preferred setting.

However, you may wish to try some of the other settings and adjust as per your personal

choice. Settings: Auto / Sunny / Fluorescent / Cloudy / Incandescent with the default setting

of Auto.

6.Contrast：

As with white balance above with the default setting 0. Options are: 0 / 1 / 2

/ 3 / 4 / 5.

7. Exposure：

This setting allows you to open or close the front camera lens to allow more

or less light into it. The default setting is 0 but if you find the ambient daylight is very poor

such as in the middle of winter, you could try opening the Exposure using the + settings to let

more light in. Similarly if you felt the images were too bright as in summer you have the option

to close the lens using the – settings. The default setting is 0 and Carcam.ie has found this very

effective and any other setting chosen is by your personal choice. Options are: -3 / -2 /-1 / 0

/ +1 / +2 / +3.

8. Power-On Record

：This setting ensures the camera begins recording a few seconds

after powering up which is the preferred setting. You will know the camera is recording as the

timer in the top left corner beside the red video cam icon will begin counting. Settings are

Open (Auto Record) or Off with the default set to Open.