Fomis TNS-0163 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Контроллер Fomis TNS-0163. Fomis TNS-0163 9 страниц. Switch bluetooth controller

Press and hold the Turbo key, pull the 3d upward; Turbo speed: 5Hz->12Hz->20Hz change

按下 Turbo 按键不放，把 3d 往下拨，Turbo 速度：20Hz->12Hz->5Hz 变化

Press and hold the Turbo key, pull the 3D downward; Turbo speed: 20Hz->12Hz->5Hz change

备注：上电默认 turbo 速度为 20Hz

Note: The default turbo speed is 20Hz after power-on.

10.7、手柄休眠清除所有按键 Trubo 功能。

10.7 The Turbo function of all keys is cleared when the controller is under dormancy state.

11、拍照（截屏）功能：

11. Function of Photographing (Screen Shot):

11.1、Switch 模式：按下拍照键后，Switch 主机截屏成图片保存。

11.1 Switch mode: After the camera key is pressed, the screen of the Switch host will be saved as a

picture.

12、电气参数：

12. Electric Parameters:

12.1：Bluetooth：5.0 协议

12.1: Bluetooth：5.0 protocol

12.2：工作温度：-40° C - 80° C

12.2: Operating temperature: -40° C - 80° C

12.3：工作电压：3.4V

12.3: Operating voltage: 3.4V

12.4: 电池电压：3.5-4.2V

12.4: Battery voltage: 3.5-4.2V

12.5：休眠电流：1uA-2uA

12.5: Dormancy current: 1uA-2uA

12.6:工作电流：30-50mA

12.6: Operating current: 30-50mA

14、3D 摇杆说明：

14. 3D Joystick Instruction:

14.1、本产品 3D 摇杆不需在 Switch 主机上手动效准，每次连接 Switch 主机时，会自动效准 3D 摇杆。

14.1 The 3D joystick of this product is not required to be calibrated manually on Switch console; the 3D joystick will

be calibrated automatically every time the Switch console is connected.