AMQ ACTIV DT Riser Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Внутренняя отделка AMQ ACTIV DT Riser. AMQ ACTIV DT Riser 5 страниц.
Также для AMQ ACTIV DT Riser: Руководство по установке (8 страниц), Руководство по устранению неполадок (2 страниц), Руководство по сборке (9 страниц)

Steps 1-5

Step 1

Use M6X14 screws (x4) to assemble base to

column. Wire the column to the control box.

M6X14

Step 4

Wire the handset to the control box and plug in the power cord.

Raise the column at least 8 inches. Use M6X25 screws (x4) to

mount te primary worksurface to support plate.

Please contact

Step 2

Use M6X8 screws (x4) to assemble the support plate

to pre-drilled holes at the bottom of column.

M6X25

if you are missing any parts, have difficulty with assembly, or have any product related questions.

M6X8

Step 5

Use M6X12 screws (x4) to attach monitor holder to top of column.

Remove the M4X10 screw under the monitor holder to release the

VESA plate. Attach the VESA plate to the monitor and resecure to

monitor holder with the M4x10 screw.

M6X12

ACTIV DT Riser Installation Guide

Step 3

Slide the primary worksurface over the column

and set column to lowest position.

M4X10