ams AG AS5145DB Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Медиаконвертер ams AG AS5145DB. ams AG AS5145DB 13 страниц.

4 AS5000 Programmer GUI software

4.1

The preliminary software is developed for a Microsoft Windows XP operating system with Service Pack 2. In addition

the dotnet (.NET) framework version 2.0 or more must be installed on the PC. This package can be downloaded free of

charge from the Microsoft webpage:

http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en

Following Procedure is recommended before starting the GUI:

check on your PC if Service Pack 2 is installed

install the mentioned .NET package to your computer

execute setup.exe

Finally start the GUI using the shortcut in the start menu or desktop.

4.2

Figure 3 shows the main window of the GUI. On the top left corner, board information's as firmware (FW) version and

demoboard name declaration can be found.

By default the GUI is in the auto detection mode. Any connected austriamicrosystems demoboard and programming tool will

be automatically detected and the device type is displayed in the right top corner of the main window. The GUI is divided into

three main sections HOME, SSI and OTP.

Revision 1.3, 22-Jul-2009

Device selection list:

Change the encoder type if a different encoder type is

connected externally on J6 and SW1 on left position

Figure 4: AS5000 GUI has detected the AS5045 Demoboard

www.austriamicrosystems.com

Page 4 of 12