DR. Heater DR-966 Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Нагреватель DR. Heater DR-966. DR. Heater DR-966 16 страниц. Wall / ceiling mount heater
Также для DR. Heater DR-966: Руководство пользователя (13 страниц)
Печатать страницу
OPERATING INSTRUCTIONS
!
WARNING
The heater must be properly installed before use.
HAZARD OF ELECTRIC SHOCK, EXPLOSION
OR ARC FLASH:
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70.
A circuit breaker must be installed and serviced only by a
certified electrician.
Always use a properly rated voltage sensing device to
confirm that the power is OFF.
The HIGH/LOW switch on the heater is only for setting
selection. Use the circuit breaker as the Power
ON/OFF switch for the heater. The circuit breaker is
to be installed by a certified electrician and should be
located in line-of-sight from the heater location, or it
should be capable of being locked in the open
position. Follow the operating instructions to reduce
the risk of fire, electric shock, injury, or death.
To turn on the heater, switch on the circuit breaker.
Then turn the thermostat to the farthest clockwise position. The
fan should start, the unit will begin heating the room,
lamp will
the thermostat counterclockwise until the heater shuts off. The
heater will cycle automatically around this preset temperature.
To increase the temperature, turn the thermostat knob
clockwise. To lower the temperature, turn the thermostat
counterclockwise.
Toggle the HIGH/LOW switch to change the heat setting.
HIGH: 6000W
LOW: 3000W
Select a thermostat setting.
light.After the room reaches a comfortable level, turn
and the
11